Corvette V8-7.0L (2007)
7. Install the 2 TORX(R) head screws (1) to the lower trim cover.
Tighten the screws to 4 N.m (35 lb in).
8. Install the driver knee bolster trim panel.
9. Install the tilt lever.
10. Enable the SIR system.
7. Install the 2 TORX(R) head screws (1) to the lower trim cover.
Tighten the screws to 4 N.m (35 lb in).
8. Install the driver knee bolster trim panel.
9. Install the tilt lever.
10. Enable the SIR system.