chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Crossmember Replacement - Rear Suspension|Page 15036 > < Crossmember Replacement - Rear Suspension|Page 15034
Page 2
background image

12. Remove the power steering gear mounting bolts.
13. Remove the power steering fluid cooler from the crossmember.
14. Lift the power steering gear off of the crossmember and support.

15. Using the  J 33432-A , remove the transverse spring from the vehicle. Refer to  Front Transverse Spring Replacement .

16. Disconnect the lower shock absorber bolts from the lower control arms.

17. Remove the lower control arm bolts from the crossmember.
18. Place a transmission jack under the crossmember.
19. Remove the engine mount lower nuts. Refer to the following procedures:

*

 Engine Mount Replacement - Left Side

*

 Engine Mount Replacement - Right Side

Crossmember Replacement - Rear Suspension|Page 15036 > < Crossmember Replacement - Rear Suspension|Page 15034