Corvette V8-7.0L (2007)
Stabilizer Bushing: Service and Repair
Front Suspension
Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assemblies.
3. Remove the stabilizer shaft from the vehicle.
4. Remove the stabilizer shaft insulators from the stabilizer shaft.
Installation Procedure
1. Install the stabilizer shaft insulators to the stabilizer shaft.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the stabilizer shaft to the vehicle.
Tighten the bolts to 58 N.m (43 lb ft).
3. Install the tire and wheel assemblies.
4. Lower the vehicle.