Corvette V8-7.0L (2007)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Remove the left instrument panel (I/P) lower insulator panel.
3. Disconnect the cruise control release switch electrical connector.
4. Remove the cruise control release switch bracket retaining bolts.
5. Remove the cruise control release switch, with bracket.
6. Remove the clutch master cylinder rod retainer.
7. Disconnect the clutch master cylinder rod from the clutch pedal.
8. Raise and suitably support the vehicle. Refer to Vehicle Lifting.