Corvette V8-7.0L (2007)
Pressure Plate: Service and Repair
Clutch Assembly Replacement
Tools Required
*
J 38836 Pilot Bushing Installer/Clutch Alignment Arbor
*
J 42386-A Flywheel Holding Tool
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the driveline support assembly with the transaxle.
4. Remove the bell housing bolts. The upper bolts can be accessed by lowering the engine cradle approximately 25 mm (1 in) and tipping the
engine back.
5. Mark the clutch pressure plate and flywheel with adjacent alignment marks before removing the pressure plate.
