Corvette V8-7.0L (2007)
26. Install the right side bearing cup, and the J 42168-15 onto the differential.
Important: In order to perform the shim selection procedure:
*
The oil seal must be removed from the right cover.
*
The pinion housing/cage must NOT be installed to the differential case.
Install the right cover (2) and J 42168-16 bolts (1) and spacers (3) to the differential. Position the J 42168-16 bolts and spacers evenly apart.
Tighten the bolts to 30 N.m (22 lb ft).