Corvette V8-7.0L (2007)
Differential Mount: Service and Repair
Transmission Mount Replacement
Tools Required
J 42055 Transmission Support Fixture
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the rear tire and wheel assemblies.
4. Remove the rear shock absorber lower mounting bolts.
5. Remove the 2 transaxle mount to rear crossmember nuts.
6. Assemble the J 42055.
7. Install the J 42055 to a transmission jack.
8. Position and firmly secure the J 42055 with the transmission jack to the transmission.
9. Position a transmission jack under the rear suspension crossmember and firmly secure the crossmember to the jack.
10. Using ONLY HAND TOOLS, remove the rear suspension crossmember retaining nuts.
11. Carefully lower the rear crossmember approximately 37 mm (1.5 in).
