Corvette V8-7.0L (2007)
Pinion Gear: Service and Repair
Drive Pinion Shim Selection (Z06)
Drive Pinion Shim Selection (Z06)
Tools Required
*
DT-48009 Shim Selection Adapters
*
J 42168-1 Shim Measuring Tool
*
J 42168-9 Shim Measuring Tool
*
J 42168-11 Shim Measuring Tool
*
J 42173 Getrag Axle Ring Gear Holder
Important: The pinion depth adjustment procedure and shim selection must be performed prior to pinion shaft and housing assembly.
1. Install the differential assembly (1) onto the J 42173 (2).
Notice: Refer to Fastener Notice.
2. Install 4 M8 x 1.25 bolts (3).
Tighten the bolts to 30 N.m (22 lb ft).
