Corvette V8-7.0L (2007)
2. Install the right output shaft (6) into the side gear (5) and retain with the output shaft retaining ring (4) - some models.
3. Install the right output shaft and gear (3), pinion gears (1), and washers (2) to the right differential case.
4. Using the J 42162 and a hydraulic press, compress the bellville washer and clutch pack in order to install the cross pin to the right differential case.
5. Using an M8 bolt for alignment, properly position the cross pin into the right differential case. The hole in the pin (2) must align with the hole in
the case. During final assembly of the case halves, the pin retaining bolt (1) must be able to pass through the hole in the cross pin.
6. With the pin and case aligned, release the pressure from the press and remove the J 42162 and bolt.
