Corvette V8-7.0L (2007)
Shifter M/T: Service and Repair
Shift Control Assembly Replacement
Shift Control Assembly Replacement
Removal Procedure
1. Remove the shift control knob.
2. Grasp the sides of the shift control boot and apply light pressure in toward the shift control lever to begin to release the shift boot retaining tabs
from the instrument panel (I/P) accessory trim plate.
3. Using light pressure, continue to release the remaining boot retaining tabs.
4. Lift the boot away from the trim plate and remove the boot.
5. Remove the I/P accessory trim plate.
6. Remove the acoustic boot for the shiftier.
7. Remove the shift control closeout boot retaining nuts.
8. Remove the shift control closeout boot.
9. Place the shiftier into NEUTRAL.
10. Press down to engage the shift control neutral lock pin.
