Corvette V8-7.0L (2007)
11. Close the door windows.
12. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
13. Close the hood.
Windshield Reveal Molding Replacement
Windshield Reveal Molding Replacement
The windshield reveal molding is an applied molding design separate from the window. The reveal molding is bonded by to the windshield and may be
bonded to the body. The reveal molding may be replaced with the windshield as an assembly, or the reveal molding may be available as a separate
service part. Refer to Urethane Adhesive Installation of Stationary Windows. See: Windows/Service and Repair/Urethane Adhesive Installation of
Stationary Windows
Windshield Side Reveal Molding Replacement (Coupe and Convertible)
Windshield Side Reveal Molding Replacement (Coupe and Convertible)
Removal Procedure
1. Remove the windshield weatherstrip side retainer.
2. Remove the windshield side reveal molding screws.
3. Peel away the reveal molding with the applique from the windshield frame.
4. Remove the applique from the reveal molding.
5. Clean all surfaces.
