Corvette V8-7.0L VIN E (2006)
20. Remove the lower control arm bolts from the crossmember.
21. Place a transmission jack under the crossmember.
22. Remove the engine mount lower nuts.
*
Engine Mount Replacement - Left in Engine - 6.0 L.
*
Engine Mount Replacement - Right in Engine - 6.0 L.
23. Disconnect the wheel speed sensor wiring harness from the crossmember.
24. Disconnect the electrical harness from the clips on the crossmember.
25. Disconnect the brake pipe from the clips on the crossmember.
26. Remove the crossmember mounting nuts.
27. Lower the crossmember out of the vehicle by removing the transmission jack from under the crossmember.
