Corvette V8-7.0L VIN E (2006)
7. Remove the left/driver sound insulator from the I/P.
8. Remove the connector position assurance (CPA) (1) from the vehicle harness yellow connector (2).
9. Disconnect the steering wheel module coil yellow connector (3) from the vehicle harness yellow connector (2).
ENABLING PROCEDURE
1. Place the ignition in the OFF position.
2. Connect the steering wheel module coil yellow connector (3) to the vehicle harness yellow connector (2).
3. Install the CPA (1) to the vehicle harness yellow connector (2).
4. Install the left sound insulator to the I/P.