Corvette V8-7.0L VIN E (2006)
10. Connect the electrical connectors (1) to the folding top control module.
11. Install the 3 electrical connectors (1) to the hydraulic pump bracket (2).
12. Add fluid as needed. Refer to Folding Top - Adding Fluid.
13. Install the rear compartment carpet.
14. Remove the protective covering.
15. Connect the battery.
16. Remove the rear compartment lid support.
17. Close the rear compartment.
18. Bleed the hydraulic system. Refer to Folding Top Hydraulic System Bleeding Procedure.
19. Inspect the hydraulic system for fluid leaks.
20. Inspect the hydraulic system fluid level and add fluid as needed.
21. Inspect the folding top for proper operation.
