Corvette V8-7.0L VIN E (2006)
Seat Cushion: Procedures
Seat Cushion Frame Replacement
SEAT CUSHION FRAME REPLACEMENT
REMOVAL PROCEDURE
1. Remove the seat.
2. Remove the pretensioner and seat belt buckle.
3. Remove the side trim panel.
4. Remove the seat cushion cover and pad.
5. Remove the inflatable restraint passenger presence system.
6. Remove the lumbar pump and module and pull them up through the seat frame and lay them aside still attached to the seat back.
7. Remove the memory seat module from the seat wires if equipped with memory seats.
8. Mark the seat back actuators to identify the right side from the left side.
9. Note the routing of the recliner mechanism cables.
10. Position the seat back full up to remove the tension from the actuator springs.
11. Remove the forward pins from the seat back actuators.
12. Remove the hinge bolts.
13. Remove the seat back.
14. Reposition the actuators underneath the seat frame springs.
