Corvette V8-7.0L VIN E (2006)
11. Install the seat module, if equipped.
12. Install the lumbar pump and module, if equipped.
13. Install the memory module, if equipped.
14. Install the trim cover and pad to the seat cushion frame.
15. Install the side trim panel.
16. Install the inflatable restraint passenger presence system.
17. Install the seat cushion cover and pad.
18. Install the pretensioner and seat belt buckle.
19. Install the seat.
Caution: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim.
Failure to do so may cause the system to malfunction.
20. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Passenger Presence System Programming and Setup.
Seat, Cushion, Cover, Pad Replacement - Front Seat
Seat, Cushion, Cover, Pad Replacement - Front Seat