Corvette V8-7.0L VIN E (2006)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve (BPMV) Replacement
Brake Pressure Modulator Valve (BPMV) Replacement
Removal Procedure
1. Turn the ignition switch to the OFF position.
2. Disconnect the electronic brake control module (EBCM) harness connector.
3. Remove the brake pressure modulator valve (BPMV) pump motor ground wire.
4. Remove the brake pipes from the master cylinder to the BPMV (1, 2), noting the location.
5. Remove the brake pipes from the BPMV (1, 2) to the front brake calipers, noting the location.
6. Remove the brake pipes from the BPMV (1, 2) to the rear brake calipers, noting the location.
