Corvette V8-7.0L VIN E (2006)
Installation Procedure
1. Install the brake caliper bracket to the suspension knuckle.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the two NEW brake caliper mounting bracket bolts (1) and washers .The new brake caliper mounting bracket bolts will come with an
adhesive already applied to the threads.
^
Tighten the brake caliper mounting bracket bolts to 175 Nm (125 ft. lbs.).
3. Lubricate the brake caliper pin bolts with high temperature silicone lubricant.
4. Install the brake pad retainers (2) to the brake caliper bracket (3).
5. Install the brake pads (1) to the brake caliper bracket (3).
6. Install the brake caliper.