Corvette V8-7.0L VIN E (2006)
INSTALLATION PROCEDURE
1. Install the heater inlet hose on to the vehicle.
IMPORTANT: Lubricate the inside diameters of the hose with clean coolant prior to installation.
2. Connect the heater inlet hose to the water pump.
3. Engage tension on the heater inlet hose clamp at the water pump.
4. Connect the heater inlet hose to the underhood junction box retainer clip.
5. Connect the heater inlet hose to the heater pipe assembly.
6. Engage tension on the heater inlet hose clamp at the heater pipe assembly.
7. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
