Valve Rocker Arm Cover Replacement Guide - Left - Corvette V8-70L (2006)
7. Remove the gasket (1) from the rocker cover. Discard the OLD gasket.
Installation Procedure
Important:
^
All gasket surfaces should be free of oil and other foreign material during assembly.
^
DO NOT reuse the valve rocker arm cover gasket.
^
The valve rocker arm cover bolt grommets may be reused.
^
If the positive crankcase ventilation (PCV) valve grommet has been removed from the rocker arm, install a NEW grommet during assembly.
1. Install a NEW rocker cover gasket (1) into the valve rocker cover lip.