Corvette V8-7.0L VIN E (2006)
5. Finger tighten the 2 bolts (4) to hold the oil pan assembly (5) in place.
6. Notice: Refer to Fastener Notice .
Install the mounting bolts (2 and 3) for the oil pan assembly.
1. Tighten the oil pan mounting bolts (2) M6 to 12 Nm (106 inch lbs.).
2. Tighten the oil pan mounting bolts (4) M8 to 25 Nm (18 ft. lbs.).
7. Reconnect the engine oil level sensor (2) electrical connector.
8. Install the right transmission cover and bolt.
^
Tighten the transmission cover bolt to 12 Nm (106 inch lbs.).
9. Install the front transmission cooler line retainer and bolt.
^
Tighten the transmission cooler line retainer and bolts to 12 Nm (106 inch lbs.).
