Corvette V8-7.0L VIN E (2006)
11. Inspect the camshaft position sensor O-ring seal (704) for cuts or damage. If the seal is not cut or damaged, it may be used again.
12. Lubricate the O-ring seal with clean engine oil.
13. Install the O-ring seal onto the sensor (703).
14. Install the sensor to the cover.
15. Install the camshaft position sensor wire harness (737) and bolts (705, 738).
^
Tighten the bolts to 12 Nm (106 inch lbs.).
16. Install the water pump.
17. Install the crankshaft balancer.
