Corvette V8-7.0L VIN E (2006)
5. Disconnect the refrigerant pressure sensor electrical connector.
6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Remove the front evaporator inlet line to A/C condenser lower bolt.
8. Disconnect the front evaporator line inlet from the A/C condenser.
IMPORTANT: Immediately cap or tape the open A/C components immediately in order to prevent contamination.
9. Remove and discard the sealing washer.
10. Cap or tape off the A/C condenser.
11. Lower the vehicle.
12. Disconnect the front evaporator inlet line from the evaporator rear line assembly.
13. Remove and discard the O-rings.
14. Cap or tape the evaporator rear line assembly.
15. Disconnect the surge tank outlet hose and the inlet heater hose from the underhood junction box retainer clip.
16. Remove the front evaporator inlet line from the vehicle.
