Corvette V8-7.0L VIN E (2006)
passenger seat.
11. Disconnect the vehicle harness yellow connector (2) from the RF side impact module and pretensioner yellow connector (3).
12. Remove the left/driver sound insulator from the I/P.
13. Remove the CPA (1) from the vehicle harness yellow connector (2).
14. Disconnect the steering wheel module coil yellow connector (3) from the vehicle harness yellow connector (2).
15. Remove both CPAs (3) from the LF/driver side impact module and pretensioner yellow connector (1) which is located under the driver seat.
16. Disconnect the vehicle harness yellow connector (2) from the LF side impact module and pretensioner yellow connector (1).
ENABLING PROCEDURE
1. Place the ignition in the OFF position.
2. Connect the vehicle harness yellow connector (2) to the LF side impact module and pretensioner yellow connector (1).
3. Install both CPAs (3) to the LF side impact module and pretensioner yellow connector (1).
