Corvette V8-7.0L VIN E (2006)
Heater Hose: Service and Repair
Heater Hose - Inlet
HEATER HOSE REPLACEMENT - INLET
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Disengage tension on the heater inlet hose clamp at the heater pipe assembly.
3. Disconnect the heater inlet hose from the heater pipe assembly.
4. Disconnect the heater inlet hose from the underhood junction box retainer clip.
5. Disengage tension on the heater inlet hose clamp at the water pump.
6. Disconnect the heater inlet hose from the water pump.
7. Remove the heater inlet hose from the vehicle.
