Corvette V8-7.0L VIN E (2006)
Body Control Module: Service and Repair
Indicator Replacement - Door Lock Status
INDICATOR REPLACEMENT - DOOR LOCK STATUS
REMOVAL PROCEDURE
1. Using a flat-bladed plastic tool, carefully pry up at the base of the door lock indicator bezel. at the door trim panel.
IMPORTANT: Use a plastic tool to remove the status indicator. Metal tools will damage the door trim.
2. Remove the door lock indicator. Use care when routing the wire harness from the door trim panel.
3. Disconnect the harness connector from the door lock indicator.
INSTALLATION PROCEDURE
