Corvette V8-7.0L VIN E (2006)
12. Remove the left fuel tank shield mount nut (3).
13. Remove the left fuel tank shield mount bolt (2).
14. Remove the left fuel tank shield (1).
15. Disconnect the auxiliary fuel return rear pipe (1) at the fuel sender.
16. Disconnect the fuel return rear pipe (2) at the fuel sender.
17. Disconnect the fuel feed rear pipe (3) at the fuel sender.
18. Remove the left side rear fuel pipes.
19. Cap the fuel sender pipes.
20. Cap the fuel filter and pressure regulator.
INSTALLATION PROCEDURE
1. Remove the caps from the fuel filter/pressure regulator.
IMPORTANT: Lubricate the fuel pipes in order to aid in installation. Use mechanic's wire attached to the fuel sender end of the fuel pipe in order to
pull the fuel pipe through the tunnel reinforcement opening. Pull the fuel pipe through from the top down.
2. Install and connect the fuel return rear pipe (7) to the fuel filter and pressure regulator.
3. Install and connect the auxiliary fuel feed rear pipe (2) from the left tank to the jet pump.
4. Install and connect the fuel feed pipe (8) at the fuel filter and pressure regulator.
5. Install and connect the auxiliary fuel return rear pipe (1) from the jet pump to the left tank.
