Corvette V8-7.0L VIN E (2006)
Throttle Body: Service and Repair
Throttle Body Cleaning Procedure
THROTTLE BODY CLEANING PROCEDURE
1. Remove the air intake duct.
CAUTION: Turn OFF the ignition before inserting fingers into the throttle bore. Unexpected movement of the throttle blade could cause
personal injury.
2. Inspect the throttle body bore and the throttle valve plate for deposits. If necessary, open the throttle valve to inspect all surfaces.
NOTE: Do not insert any tools into the throttle body bore in order to avoid damage to the throttle valve plate.
3. Clean the throttle body bore and the throttle valve plate using a clean shop towel with an appropriate cleaning substance, such one of the
following:
-
GM Top Engine Cleaner
-
P/N 1052626
-
AC-Delco Carburetor Tune-Up Conditioner
-
P/N X66-P
NOTE: Do not use any solvent that contains Methyl Ethyl Ketone (MEK). This solvent may damage fuel system components.
4. Install the air intake duct.