Corvette V8-7.0L VIN E (2006)
3. Remove the kick-up panel (2) to expose the instrument panel (I/P) fuse block.
4. Remove the I/P fuse block cover (1).
5. Locate the SDM fuse within the I/P fuse block.
IMPORTANT: With the SDM fuse removed and the ignition in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.
6. Remove the SDM fuse from the I/P fuse block.
7. Remove both Connector Position Assurance (CPA) (1) from the RF/passenger side impact module and seat belt pretensioner yellow connector (3)
which is located under the passenger seat.
8. Disconnect the vehicle harness yellow connector (2) from the RF side impact module and pretensioner yellow connector (3).
ENABLING PROCEDURE
1. Place the ignition in the OFF position.
