Corvette V8-7.0L VIN E (2006)
Steering Gear: Service and Repair
Rack and Pinion Boot Replacement - Off Vehicle
Rack and Pinion Boot Replacement - Off Vehicle
^
Tools Required
-
J 22610 Keystone Clamp Pliers
Disassembly Procedure
1. To remove the outer tie rod; refer to Rack and Pinion Outer Tie Rod End Replacement.
2. Remove the hex jam nut (2) from the inner tie rod assembly (1).
3. Remove the tie rod end clamp (2) from the rack and pinion boot (1).