Corvette V8-7.0L VIN E (2006)
Suspension Strut / Shock Absorber: Service and Repair
Rear Suspension Shock Absorber
Shock Absorber Replacement (W/F55)
Removal Procedure
1. Raise and Support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Disconnect the rear shock electronic suspension control (ESC) harness connector.
4. Disconnect the harness pigtail from the upper shock tower clip.
5. Remove the lower shock absorber to lower control arm retaining bolt.
6. Remove the upper shock absorber mounting bolts.
7. Disconnect the outer tie rod from the suspension knuckle.
8. Carefully remove the shock absorber from the vehicle. Take care when routing the ESC pigtail and connector through the upper shock tower.
9. Remove the upper insulator retainer and insulator from the shock absorber.
Installation Procedure
