Corvette V8-7.0L VIN E (2006)
28. Disconnect the wiring harness and brake pipe clip retainers from the rear suspension crossmember.
29. Remove the transaxle mount to rear crossmember nuts.
30. Position a transmission jack under the rear suspension crossmember and firmly secure the crossmember to the jack.
31. Using ONLY HAND TOOLS, remove the rear suspension crossmember retaining nuts.
32. With the aid of an assistant, slowly lower the rear suspension crossmember away from the vehicle frame rails and remove the crossmember.
33. Remove the transaxle mount bracket to differential bolts.
34. Remove the transaxle mount with bracket. Removing the transaxle mount will allow for greater stability on a workbench after the driveline is
removed.
