Corvette V8-7.0L VIN E (2006)
15. Remove the nuts retaining the transmission shift cable bracket to the transmission.
16. Disconnect the transmission shift control cable from the transmission shift lever. Unsnap to release the cable.
17. Reposition the transmission shift cable and bracket.
18. Remove the rear transverse spring.
19. Support the lower control arm with a straight jack.
20. Disconnect the outer tie rod end from the suspension knuckle.
21. Remove the shock absorber lower mounting bolt.
22. Disconnect the lower ball joint from the suspension knuckle.
23. Remove the straight jack from the control arm.
24. Repeat steps 19 through 23 for the other side of the vehicle.
25. Assemble the J 42055.
26. Install the J 42055 to a transmission jack.
27. Position and firmly secure the J 42055 with the transmission jack to the transmission.
