chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Brakes and Traction Control > < Transmission Temperature Sensor/Switch, M/T|Locations|Page 11828
Page 1
background image

Transmission Temperature Sensor/Switch: Service and Repair

Transmission Fluid Temperature (TFT) Sensor Replacement 

Removal Procedure 

1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the transmission fluid temperature sensor electrical connector.

3. Remove the transmission fluid temperature sensor.

Installation Procedure 

1. Notice:  Refer to Fastener Notice in Service Precautions.

Install the transmission fluid temperature sensor.

Tighten the transmission fluid temperature sensor to 27 Nm (20 ft. lbs.). 

2. Connect the transmission fluid temperature sensor electrical connector.
3. Lower the vehicle.

Brakes and Traction Control > < Transmission Temperature Sensor/Switch, M/T|Locations|Page 11828