Corvette V8-7.0L VIN E (2006)
Power Window Motor: Service and Repair
REINITIALIZATION OF THE POWER WINDOW
The reinitialization of the power window will be necessary anytime a door module has been disconnected or replaced. The power window will be
reinitialized when the door module learns the full up and full down positions.
To reinitialize a power window:
1. Close the door for the window being reinitialized.
2. Turn ON the ignition, with the engine OFF.
3. Run the window to the full up position and hold the switch continuously for a minimum of 0.5 seconds.
4. Run the window to the full down position and hold the switch continuously for a minimum of 0.5 seconds.