Cruze L4-1.4L Turbo (2011)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Replacement
Brake Pressure Modulator Valve Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Caution).
1. Prepare electronic brake control module for replacement. Refer to Control Module References (See: Testing and Inspection/Programming and
Relearning).
2. Turn the ignition to the OFF position.
Note: Do NOT disconnect engine coolant hoses.
3. Remove the radiator surge tank clip (2).
4. Remove the radiator surge tank (1).
Position the radiator surge tank (1) aside.
Caution: Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position.
Failure to observe this precaution could result in damage to the EBCM/EBTCM.
5. Disconnect the electrical connector from the EBCM/EBTCM.
