Cruze L4-1.4L Turbo (2011)
1. If installing a new brake drum (2), use denatured alcohol or an equivalent approve brake cleaner and a clean shop towel to remove the protective
coating from the friction surface of the drum.
2. Adjust the drum brakes. Refer to Drum Brake Adjustment (See: Adjustments).
3. Install the drum brake.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install drum brake screw (1) and tighten to 7 Nm (62 lb in).
5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
6. Lower the vehicle.
7. Apply the brakes approximately three times in order to seat and center the brake shoes within the drum.
