Cruze L4-1.4L Turbo (2011)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install wheel cylinder mounting bolts (2) and tighten to 10 Nm (89 lb in).
3. Connect the brake pipe fitting (1) at the wheel cylinder and tighten to 18 Nm (14 lb ft).
4. Install the brake shoes. Refer to Brake Shoe Replacement (See: Brake Shoe/Service and Repair).
5. Install the brake drum. Refer to Brake Drum Replacement (See: Brake Drum/Service and Repair/Removal and Replacement).
6. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair/Hydraulic
Brake System Bleeding (Manual))Hydraulic Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair/Hydraulic Brake
System Bleeding (Pressure)).
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
8. Lower the vehicle.
