Cruze L4-1.4L Turbo (2011)
Brake Hose/Line: Service and Repair
Rear Brake Hose Replacement
Rear Brake Hose Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Caution).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
3. Remove rear wheel speed sensor from brake hose. Refer to Rear Wheel Speed Sensor Replacement (Disc Brake) (See: Antilock Brakes /
Traction Control Systems/Wheel Speed Sensor/Service and Repair/Rear Wheel Speed Sensor Replacement (Disc Brake))Rear Wheel Speed
Sensor Replacement (Drum Brake) (See: Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair/Rear Wheel
Speed Sensor Replacement (Drum Brake)).
4. Clean all dirt and foreign material from the brake hose ends and the brake pipe fitting.
5. Use a flare nut wrench on the brake pipe fitting (1) and a backup wrench on the brake hose (3) under the brake hose retainer (2).