Cruze L4-1.4L Turbo (2011)
7. Install the air conditioning evaporator hose (3) to the condenser. Use a NEW seal ring.
8. Tighten the air conditioning evaporator hose nut to 19 Nm (14 lb ft).
9. Connect the air conditioning refrigerant pressure sensor wiring harness plug (2).
10. Connect the engine coolant temperature sensor wiring harness plug (1).
11. Lower the vehicle.
12. Install the radiator inlet hose to the radiator. Refer to Charge Air Cooler Inlet Air Hose Replacement (See: Powertrain Management/Fuel Delivery
and Air Induction/Turbocharger/Intercooler/Service and Repair/Charge Air Cooler Inlet Air Hose Replacement).
13. Install the radiator outlet hose to the radiator. Refer to Charge Air Cooler Outlet Air Hose Replacement (See: Powertrain Management/Fuel
Delivery and Air Induction/Turbocharger/Intercooler/Intercooler Duct/Service and Repair).
14. Install the radiator inlet hose to the radiator. Refer to Radiator Inlet Hose Replacement (LDD, LUH, and LUJ) (See: Radiator Hose/Service and
Repair/Radiator Inlet Hose Replacement)Radiator Inlet Hose Replacement (LDE, LXV, 2H0, and LUW) (See: Radiator Hose/Service and
Repair/Radiator Inlet Hose Replacement).
15. Install the radiator outlet hose to the radiator. Refer to Radiator Outlet Hose Replacement (LDD, LUH, and LUJ) (See: Radiator Hose/Service and
Repair/Radiator Outlet Hose Replacement)Radiator Outlet Hose Replacement (LDE, LXV, 2H0, and LUW) (See: Radiator Hose/Service and
Repair/Radiator Outlet Hose Replacement).
16. Top up the refrigerant. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Procedures/Refrigerant Recovery and Recharging).
17. If the headlamp was removed. Refer to Headlamp Replacement (See: Lighting and Horns/Headlamp/Service and Repair).
18. Top up the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair/Cooling System Draining and
Filling (Static Fill))Cooling System Draining and Filling (GE-47716 Fill) (See: Service and Repair/Cooling System Draining and Filling
(GE-47716 Fill)).
19. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Front Bumper Fascia Replacement).
20. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
Radiator Support Bracket Replacement
Radiator Support Bracket Replacement