Cruze L4-1.4L Turbo (2011)
Caution: The camshaft position actuator solenoid valves must be kept parallel to the engine front cover during removal and installation. The
camshaft position actuator solenoid valves can be damaged if they become wedged or stuck during this process.
Note: Lubricate the seal rings with oil in order to make the installation easier.
1. Carefully install the 2 camshaft position actuator solenoid valves (2) and the 2 seal rings (1) by gently pressing into position.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the 4 camshaft position actuator solenoid valve bolts (1) and tighten to 8 Nm (71 lb in).