Cruze L4-1.4L Turbo (2011)
Engine Mount: Procedures
Powertrain Mount Balancing
Powertrain Mount Balancing
Note: Follow the balance procedure steps listed below when no starting point has been established such as in a collision repair.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Loosen the front transaxle mount through bolt (1) until it is finger tight.
3. Loosen the rear transaxle mount (1) through bolt until it is finger tight.
4. Lower the vehicle.
