Cruze L4-1.4L Turbo (2011)
Note: Lubricate the NEW oil filter cap seal ring with engine oil.
5. Install the engine oil filter cap (2) in compound with a NEW engine oil filter cap seal ring (3) and a NEW oil filter element (1).
Caution: Over torquing the oil filter cap may cause damage to the oil filter cap resulting in an oil leak.
6. Tighten the engine oil filter cap to 25 Nm (18 lb ft).
Caution: Using engine oils of any viscosity other than those viscosities recommended could result in engine damage.
Note: Do not overfill the engine with engine oil.
7. Fill in NEW engine oil. Refer to Engine Mechanical Specifications (See: Specifications/Service Limits & General Specifications) to find the
specified viscosity and volume.
8. Start the engine and allow it to run until the oil pressure control indicator goes off.
9. Inspect the engine oil level.
10. Close hood.
11. Reset the service interval indicator.
