Cruze L4-1.4L Turbo (2011)
5. Install the turbocharger coolant return pipe hose (2) to the engine oil cooler inlet pipe.
6. Install the turbocharger coolant return pipe hose clamp (3).
7. Install turbocharger coolant return pipe bolt (1) and tighten to 10 Nm (89 lb in).
8. Install the engine oil cooler inlet hose to the engine oil cooler inlet pipe. Refer to Engine Oil Cooler Inlet Hose Replacement (1.4L LUH and LUJ)
(See: Engine Oil Cooler Inlet Hose Replacement).
9. Install the warm up three way catalytic converter. Refer to Warm Up Three-Way Catalytic Converter Replacement (1.4L LUH and LUJ) (See:
Exhaust System/Heat Shield/Service and Repair/Warm Up Three-Way Catalytic Converter Replacement).
10. Fill up coolant fluid. Refer to Cooling System Draining and Filling (Static Fill) (See: Cooling System/Service and Repair/Cooling System
Draining and Filling (Static Fill))Cooling System Draining and Filling (GE-47716 Fill) (See: Cooling System/Service and Repair/Cooling System
Draining and Filling (GE-47716 Fill)).
