Cruze L4-1.4L Turbo (2011)
12. Install the turbocharger coolant return pipe (3) to the oil cooler inlet pipe.
13. Install the turbocharger coolant return pipe clamp (2).
14. Install turbocharger coolant return pipe bolt (1) and tighten to 10 Nm (89 lb in).
15. Connect the oil pressure indicator switch wiring harness plug.
16. Raise vehicle.
17. Install the oil cooler outlet pipe (2) in compound with the oil cooler outlet hose to the oil cooler.
18. Install the oil cooler outlet pipe bolt (1) to the engine block and tighten to 10 Nm (89 lb in).
19. Install the warm up three way catalytic converter. Refer to Warm Up Three-Way Catalytic Converter Replacement (1.4L LUH and LUJ) (See:
Exhaust System/Heat Shield/Service and Repair/Warm Up Three-Way Catalytic Converter Replacement).
