Cruze L4-1.4L Turbo (2011)
Oil Pan: Service and Repair
Oil Pan Replacement (1.4L LUH and LUJ)
Special Tools
EN-49980 - Guidance Pins
For equivalent regional tools, refer to Special Tools (See: Tools and Equipment).
Removal Procedure
1. Open the hood.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
3. Drain engine oil. Refer to Engine Oil and Oil Filter Replacement (See: Engine Oil/Service and Repair).
4. Remove the catalytic converter. Refer to Catalytic Converter Replacement (1.4L LUH and LUJ) (See: Exhaust System/Catalytic
Converter/Service and Repair)Catalytic Converter Replacement (1.6L LDE, LXV, 1.8L 2H0, and LUW) (See: Exhaust System/Catalytic
Converter/Service and Repair).
5. Remove the warm up three way catalytic converter. Refer to Warm Up Three-Way Catalytic Converter Replacement (1.4L LUH and LUJ) (See:
Exhaust System/Heat Shield/Service and Repair/Warm Up Three-Way Catalytic Converter Replacement).
6. Remove the engine oil heater. Refer to Engine Oil Heater Replacement (See: Service and Repair)
7. Remove the 3 transmission to oil pan bolts (1).
