Cruze L4-1.4L Turbo (2011)
3. The 2 camshaft position actuator solenoid valves should be installed in the position as shown (1) and (2).
4. Clip ECM wiring harness (1) to camshaft cover.
5. Connect the exhaust camshaft position actuator solenoid valve wiring harness plug (2).
6. Connect the intake camshaft position actuator solenoid valve wiring harness plug (3).
7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (1.4L LUH and LUJ) (See: Tune-up and Engine Performance
Checks/Air Cleaner Housing/Service and Repair).