Cruze L4-1.4L Turbo (2011)
Control Module HVAC: Service and Repair
HVAC - Automatic
Heater and Blower and Air Conditioning Control Module Replacement (Left Hand Drive)
Removal Procedure
1. Remove instrument panel compartment. Refer to Instrument Panel Compartment Replacement (See: Body and Frame/Interior Moulding /
Trim/Glove Compartment/Service and Repair/Instrument Panel Compartment Replacement).
2. Remove floor air outlet duct right side. Refer to Floor Air Outlet Duct Replacement - Right Side (Left Hand Drive) (See: Air Duct/Service and
Repair/Floor Air Outlet Duct Replacement - Right Side (Left Hand Drive)).
3. Remove the 2 heater and blower and air conditioning control module bolts (1) and the heater and blower and air conditioning control module
wiring harness plug (2).
4. Remove heater and blower and air conditioning control module (3).
Installation Procedure