Cruze L4-1.4L Turbo (2011)
Wheel Bearing: Service and Repair
Front Wheel Bearing and Hub Replacement
Special Tools
EN-45059 - Torque Angle Sensor Kit
For equivalent regional tools, refer to Special Tools (See: Steering and Suspension/Suspension/Tools and Equipment/Front Suspension).
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
2. Remove the brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement).
3. Remove the wheel speed sensor screw (2).
4. Remove the wheel speed sensor (1) from the steering knuckle.
5. Remove the wheel drive shaft from the front wheel bearing/hub. Refer to Front Wheel Drive Shaft Replacement - Left Side (See: Transmission
and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Wheel Drive Shaft Replacement - Left Side)
and/or Front Wheel Drive Shaft Replacement - Right Side (See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Front Wheel Drive Shaft Replacement - Right Side).
