Cruze L4-1.4L Turbo (2011)
2. Install the current sensor (5) to the battery tray.
3. Connect the wiring harness current sensor plug (4).
4. Install the battery negative cable (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the battery ground cable nut (1) and tighten to 9 Nm (80 lb in).
6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
7. Close the hood.